Difference between revisions of "MeterBoard/CPUE"
From Hackstrich
| Line 2: | Line 2: | ||
== Status == | == Status == | ||
| + | * 2015-03: Built board, SPI tests OK, Ethernet gets link but has no packets move. Still troubleshooting. | ||
| + | * 2014-12: Sent off CAM files, boards received. | ||
* 2014-12-08: Finished routing board, silkscreen done, checklist run. Now 24h waiting period before CAM processing. | * 2014-12-08: Finished routing board, silkscreen done, checklist run. Now 24h waiting period before CAM processing. | ||
* 2014-12-07: More routing completed. | * 2014-12-07: More routing completed. | ||
Revision as of 23:31, 26 March 2015
MeterBoard/CPUE is the CPU+Ethernet module for the MeterBoard system.
Status
- 2015-03: Built board, SPI tests OK, Ethernet gets link but has no packets move. Still troubleshooting.
- 2014-12: Sent off CAM files, boards received.
- 2014-12-08: Finished routing board, silkscreen done, checklist run. Now 24h waiting period before CAM processing.
- 2014-12-07: More routing completed.
- 2014-11-22: Schematic completed/checklisted, started routing board.
- 2014-11-12: Started putting together initial design/BOM/schematic.
Specs
- 10/100 Ethernet for control
- Optional PoE to power the whole system
- If not using PoE, regular barrel jack to power the system
- 8 SPI Link ports to connect to I/O modules
- Share one bus, each just has their own nSS
- 2 I2C ports for future expansion
- Each are separate busses
