EL Driver 1

From Hackstrich
Revision as of 03:37, 3 December 2011 by SarahEmm (talk | contribs) (Schematic complete! :))

The EL Driver 1 will be an EL wire driver, that can be plugged into the EL Shield (revision 2+) and a future baseboard for standalone use.

  • Generates 80VDC @ ~50-150mA from 3-15V in using the LT3575 IC
  • Converts the 80VDC into 160v p-p using an H bridge
    • H bridge is driven from a PIC10F microcontroller
    • Can be set to low frequency, high frequency, or fed a pulse train from an external device

Status

  • 2011-12-02: Completed schematic and BOM.
  • 2011-12-01: Completed most of the schematic and BOM, LEDs still remaining to be done.
  • 2011-11-30: Design of flyback converter based around LT3575 finalized. Started the schematic entry.
  • 2011-11-29 and prior: LTspice simulations to finalize design.