Beacon4 will be the fourth incarnation of the flagpole beacon (after Beacon2 and Beacon3), for Burning Man 2012. This year the plan is to take a different approach, and light the entire scaffold tower rather than just a beacon on top of the flagpole.

Project Status

2012-07-19: fitPC is here!
2012-07-15: Ordered inter-strip connectors and remaining PWR-DC5, CORE, and IO-ETH parts.
2012-07-14: First successful end-to-end test of the whole StrichLux system driving 5m of LED strip from the PWR-DC5.
2012-07-11: Ordered the switch.
2012-07-09: Ordered the majority of enclosure connectors.
2012-07-07: First functioning test of StrichLux system driving 5m of LED strip.
2012-06-24: LED strips all obtained. Lighting design continues, as does firmware development.
2012-06-17: Hardware bring-up and firmware writing continuing. Lightjams is almost certainly going to be the software of choice. Lighting design is coming along.
2012-06-07: Work on StrichLux continues. Evaluated lots of software, Lightjams is looking the best at this point, though would require Windows.
2012-05-27: Completed rev. 1 StrichLux system design of all modules required for this project and sent all boards off for manufacturing.
2012-04-30: Started planning the power architecture for the project.
2012-04-29: Work continuing on IO-DMX module.
2012-04-24: Permission received!
2012-04-23: Requested permission from NeonBunny to attach LEDs to the tower.
2012-04-22: Started putting together idea.

Outstanding Issues

Software evaluation:
- Theatre-type systems
  - QLC
    - Max of only 4 universes, which rules it out
  - MagicQ
    - Very complex and more geared toward theatre setups than VJ setups
    - Supports up to 16 universes over Art-Net
    - x86-only
    - Advanced features like sound-reactiveness or remote control require a very expensive license dongle
- VJ-type systems
  - Lightjams
    - x86/Windows-only
    - Supports up to 16 universes over Art-Net
    - File format is XML, so a lot of setup could be programmatically generated
    - Sound reactiveness, remote control, Wiimote control, and everything else is included for a low price
    - May not be able to switch programs/grids by timer, could possibly implement via macros?
- Patching-type systems
  - Max
    - x86/Windows/Mac-only
  - Isadora
    - x86/Windows/Mac-only

Ideas/Plans

Main idea is to cover most of the scaffold tower in addressable LED strips, driven by multiple StrichLux modules
Art-Net will be used between the controller and the StrichLux box
Fit-PC 2i is being looked at to control the whole thing
- As nice as ARM would be power-wise, x86 will be much more flexible software-wise
- Need to make sure it will be powerful enough before we order
Need to find a fanless very low power 4 or 5 port Ethernet switch
- Allied Telesis AT-FS705LE V5 might work, it's rugged, low power (1.5-2.5W), and cheap
  - But it takes 7.5V which would be another regulator and is a potential point of failure that would bring the entire system down
- Alternative option is the GarrettCom S14H-Hi, it takes 8-15V in via screw terminals and is ruggedized, but $140 and draws 4W
- Best option may be the Sixnet SL-5ES-1, it's $100, rugged, takes 10-30VDC via screw terminals, and only draws 2W
- Ended up going with an M12 ethernet switch, the Octopus 5TX EEC

System Components

Fit-PC 2i (controller)
Octopus 5TX EEC 5-port Ethernet switch
3 StrichLux boxes (driver), each with:
- 1x PWR-DC5
- 1x IO-ETH
- 4x IO-SPI
60m of LED strips
Power setup
Debugging terminal (XO-1? Toughbook?)

Power Details

Power requirements (peak)
- Fit-PC 2i - ???
- Ethernet Switch - ???
- StrichLux box(es) - ???
- LEDs - 10W/m (~1.8A/m at 5V measured, so 10W/m after losses is reasonable)

Power Architecture

http://www.asciiflow.com/#4007824742034929919/13747898[YOB-2]
                                                                              +--------------+
                                                                         +--->| LED Strip  0 |
                                                                         |    +--------------+
                                                                         |
                                                                         |    +--------------+
                                                       +---------------+ | +->| LED Strip  1 |
                                +--------------+       |               +-+ |  +--------------+
                                |              |       |   StrichLux   +---+
                                |     Dome     |    +->| Controller A  +---+  +--------------+
                                |   Lighting   |    |  |               +-+ +->| LED Strip  2 |
                                |              |    |  +---------------+ |    +--------------+
                                +--------------+    |                    |
                                        ^           |                    |    +--------------+
                                        |           |                    +--->| LED Strip  3 |
                             +----------+---------+ |                         +--------------+
                             |                    | |
                             |                    | |                         +--------------+
                             |                    +-+                    +--->| LED Strip  4 |
                             |                    |                      |    +--------------+
                             |                    |                      |
                             |                    |                      |    +--------------+
                             |                    |    +---------------+ | +->| LED Strip  5 |
    +---------------+        |                    |    |               +-+ |  +--------------+
    |               |        |    Distribution    |    |   StrichLux   +---+
    |    Battery    +=======>|                    +--->| Controller B  +---+  +--------------+
    |               |        |        Box         |    |               +-+ +->| LED Strip  6 |
    +---------------+        |                    |    +---------------+ |    +--------------+
                             |                    |                      |
                             |                    |                      |    +--------------+
                             |                    |                      +--->| LED Strip  7 |
                             |                    |                           +--------------+
                             |                    +-+
                             |                    | |                         +--------------+
                             +--+-------+---------+ |                    +--->| LED Strip  8 |
                                |       |           |                    |    +--------------+
                      +---------+       |           |                    |
                      v                 v           |                    |    +--------------+
              +--------------+   +--------------+   |  +---------------+ | +->| LED Strip  9 |
              |              |   |              |   |  |               +-+ |  +--------------+
              | Convienience |   |    System    |   |  |   StrichLux   +---+
              |   Outlets    |   |  Controller  |   +->| Controller C  +---+  +--------------+
              |              |   |              |      |               |   +->| LED Strip 10 |
              +--------------+   +--------------+      +---------------+      +--------------+

Lighting Layout

Random Notes

Decided on 60m length total (3 StrichLux boxes)
- That's 1920 RGB LEDs and ~600W peak!
- Will need to come up with a lighting layout/design that will fit within this

Dimensions

Main Module (4 of these vertically, 2 of which will be lit)
-----------------------------------------------------------

+-----D-----+------E------+       |\                                   /|
|           |             |       |    \                           /    |
|-----D-----|             |       |        F                   /        |
|           H             |       |            \           /            |
|-----D-----|             |       |                \   /                |
|           |             |       |                /   \                |
|-----D-----+------E------|       |            /           \            |
|                         |       |        F                   \        |
A                         A       A    /                           \    A
|-----------B-------------+       |/                                   \|


Top Module
----------

|                         |       |                                     |
|                         |       |                                     |
|                         |       |                                     |
|                         |       |                                     |
|-------B-----------------|       |------------------C------------------|
|            |            |       |  /                               \  |
|            G            |       |------------------C------------------|
|            |            |       |                                     |
A============B============A       A                                     A
|                         |       |                                     |

A - Module Height (5ft 1in)
B - Module Width (5ft)
C - Module Depth (7ft)
D - Ladder Width (2.5ft)
E - Beside-Ladder Width (B - D) (2.5ft)
F - Cross-brace Length (7.37ft)
G - Top Rail Support Height
H - Ladder Section Height (3.5ft)
n - Number of Modules (3)
x - Number of Main Modules (2)

Idealized Layout

Vertical Mains: A * 4 * n = 5.083 * 4 * 3 = 61ft (done piecing)
Beside-Ladder Boxes: (E * 2 + H) * 2 * x = 34ft (done piecing)
Cross-braces: F * 2 * 2 * x = 7 * 2 * 2 * 2 = 59ft (done piecing)
Top Rail: B * 2 + C * 2 = 24ft (done piecing)
Top-Middle Rail: C * 2 = 14ft (done piecing)
Toe Board: B * 4 = 10ft (done piecing)
Total: 202ft / 61.5m

Actual Layout

Vertical Mains: 4.5m each * 4
Cross brace tubes: 1.125m each * 8
Toe board: 1.5m each * 2
Top middle rail: 2.1m each * 2
Top rail long side: 2.1m each * 2
Top rail short side: 1.5m each * 2
Ladder box vertical: 1m each * 4
Ladder box horizontal: 0.75m * 8
Total: 60.00m

LED Strip List

ID	Piece	Location	Length	# of LEDs	Reel	Controller/Channel	DMX Channels	LightJams IDs
S01	Vertical Main 1	Vertical Main 1	450cm	144	C	A-1	1-432	AAA-AQP
S02	Vertical Main 2	Vertical Main 2	450cm	144	D	A-2	1-432	BAA-BQP
S03	Vertical Main 3	Vertical Main 3	450cm	144	E	A-3	1-432	CAA-CQP
S04	Vertical Main 4	Vertical Main 4	450cm	144	F	A-4	1-432	DAA-DQP
S05	Cross brace tube 1	MF1/2 B Right	218.75cm	70	G	B-1	1-210	EAA-EIB
S06	Cross brace tube 2	MF1/2 A Right	218.75cm	70	G	B-2	1-210	FAA-FIB
S07	Cross brace tube 3	MF1/2 A Left	218.75cm	70	H	B-3	1-210	GAA-GIB
S08	Cross brace tube 4	MF1/2 B Left	218.75cm	70	H	B-3	211-420	GIC-GQD
S09	Cross brace tube 5	MF3/4 A Right	218.75cm	70	I	C-1	1-210	IAA-IIB
S10	Cross brace tube 6	MF3/4 B Right	218.75cm	70	I	C-2	1-210	JAA-JIB
S11	Cross brace tube 7	MF3/4 B Left	218.75cm	70	J	C-3	1-210	KAA-KIB
S12	Cross brace tube 8	MF3/4 A Left	218.75cm	70	J	C-3	211-420	KIC-KQD
S13	Toe board 1	1 (Close)	150cm	48	A	C-4	349-492	KNK-KSX
S14	Toe board 2	2 (Far)	150cm	48	A	C-4	1-144	LAA-LFN
S15	Top middle rail 1	Left	212.5cm	68	K	C-4	145-348	LFO-LNJ
S16	Top middle rail 2	Right	212.5cm	68	K	C-1	307-510	ILU-ITP
S17	Top long rail 1	Right	212.5cm	68	L	C-2	307-510	JLU-JTP
S18	Top long rail 2	Left	212.5cm	68	L	B-4	145-348	HFO-HNJ
S19	Top short rail 1	TF1	150cm	48	B	B-4	1-144	HAA-HFN
S20	Top short rail 2	TF2	150cm	48	B	B-4	349-492	HNK-HSX
S21	Ladder box vertical 1	MF1	100cm	32	A	B-1	283-378	ELU-EPL
S22	Ladder box vertical 2	MF2	100cm	32	A	B-2	283-378	FLU-FPL
S23	Ladder box vertical 3	MF3	100cm	32	B	C-1	211-306	IIC-ILT
S24	Ladder box vertical 4	MF4	100cm	32	B	C-2	211-306	JIC-JLT
S25	Ladder box horizontal 1	MF1 Top	75cm	24	C, D	B-1	211-282	EIC-ELT
S26	Ladder box horizontal 2	MF1 Bottom	75cm	24	E, D	B-1	379-450	EPM-ESF
S27	Ladder box horizontal 3	MB2 Top	75cm	24	K	B-2	211-282	FIC-FLT
S28	Ladder box horizontal 4	MF2 Bottom	75cm	24	L	B-2	379-450	FPM-FSF
S29	Ladder box horizontal 5	MF3 Top	75cm	24	G, H	A-1	433-504	AQQ-ATJ
S30	Ladder box horizontal 6	MF3 Bottom	75cm	24	I, H	A-2	433-504	BQQ-BTJ
S31	Ladder box horizontal 7	MF4 Top	75cm	24	J, H	A-3	433-504	CQQ-CTJ
S32	Ladder box horizontal 8	MF4 Bottom	75cm	24	F, H	A-4	433-504	DQQ-DTJ

Reel Assignment

Reel A (100% used)
- Toe Board 1: 150cm
- Toe Board 2: 150cm
- Ladder box vertical 1: 100cm
- Ladder box vertical 2: 100cm
Reel B (100% used)
- Top short rail 1: 150cm
- Top short rail 2: 150cm
- Ladder box vertical 3: 100cm
- Ladder box vertical 4: 100cm
Reel C (100% used)
- Vertical Main 1: 450cm
- Ladder box horizontal 1a: 50cm (chunk 1)
Reel D (100% used)
- Vertical Main 2: 450cm
- Ladder box horizontal 1b: 25cm (chunk 2)
- Ladder box horizontal 2b: 25cm (chunk 2)
Reel E (100% used)
- Vertical Main 3: 450cm
- Ladder box horizontal 2a: 50cm (chunk 1)
Reel F (100% used)
- Vertical Main 4: 450cm
- Ladder box horizontal 8a: 50cm (chunk 1)
Reel G (100% used)
- Cross brace tube 1: 218.75cm
- Cross brace tube 2: 218.75cm
- Ladder box horizontal 5a: 62.5cm (chunk 1)
Reel H (100% used)
- Cross brace tube 3: 218.75cm
- Cross brace tube 4: 218.75cm
- Ladder box horizontal 5b: 12.5cm (chunk 2)
- Ladder box horizontal 6b: 12.5cm (chunk 2)
- Ladder box horizontal 7b: 12.5cm (chunk 2)
- Ladder box horizontal 8b: 25cm (chunk 2)
Reel I (100% used)
- Cross brace tube 5: 218.75cm
- Cross brace tube 6: 218.75cm
- Ladder box horizontal 6a: 62.5cm (chunk 1)
Reel J (100% used)
- Cross brace tube 7: 218.75cm
- Cross brace tube 8: 218.75cm
- Ladder box horizontal 7a: 62.5cm (chunk 1)
Reel K (100% used)
- Top middle rail 1: 212.5cm
- Top middle rail 2: 212.5cm
- Ladder box horizontal 3: 75cm
Reel L (100% used)
- Top long rail 1: 212.5cm
- Top long rail 2: 212.5cm
- Ladder box horizontal 4: 75cm

Cable Routing

Overview
- When viewing the tower end-on with the ladder on the left:
  - Vertical Main 1 is on the left of the close end
  - Vertical Main 2 is on the right of the close end
  - Vertical Main 3 is on the left of the far end
  - Vertical Main 4 is on the right of the far end
  - Main Frame 1 is the lower close frame of the 2 lit ones
  - Main Frame 2 is the lower far frame of the 2 lit ones
  - Main Frame 3 is the higher close frame of the 2 lit ones
  - Main Frame 4 is the higher far frame of the 2 lit ones
  - Top Frame 1 is the close top frame
  - Top Frame 2 is the far top frame
  - Cross Brace A are the tubes running low-to-high from MF1/3 to MF2/4
  - Cross Brace B are the tubes running high-to-low from MF1/3 to MF2/4
  - Toe Board 1 is the close board
  - Toe Board 2 is the far board

Controller A
- Channel 1
  - Feeder (up VM1) -> Vertical Main 1 -> Long Jumper (via Toe Board 1, down VM2) -> MF3 LBH Top
- Channel 2
  - Feeder (up VM2) -> Vertical Main 2 -> Long Jumper (down VM2) -> MF3 LBH Bottom
- Channel 3
  - Feeder (up VM3) -> Vertical Main 3 -> Long Jumper (via Toe Board 2, down VM4) -> MF4 LBH Top
- Channel 4
  - Feeder (up VM4) -> Vertical Main 4 -> Long Jumper (down VM4) -> MF4 LBH Bottom
Controller B
- Channel 1
  - Feeder (up VM4) -> CB MF1/2 B Right -> MF1 LBH Top -> MF1 LBV -> MF1 LBH Bottom
- Channel 2
  - Feeder (up VM2) -> CB MF1/2 A Right -> MF2 LBH Top -> MF2 LBV -> MF2 LBH Bottom
- Channel 3
  - Feeder (up VM1) -> CB MF1/2 A Left -> Short Jumper -> CB MF1/2 B Left
- Channel 4
  - Feeder (up VM3) -> Short Jumper (via TF2 Top Short Rail) -> TF2 Top Short Rail -> Left Top Long Rail -> TF1 Top Short Rail
Controller C
- Channel 1
  - Feeder (up VM4) -> CB MF3/4 A Right -> Short Jumper -> MF3 LBV -> Long Jumper (via MF3 LBH Top, VM2) -> Right Top Middle Rail
- Channel 2
  - Feeder (up VM2) -> CB MF 3/4 B Right -> Short Jumper -> MF4 LBV -> Long Jumper (via MF4 LBH Top, VM4) -> Right Top Long Rail
- Channel 3
  - Feeder (up VM3) -> CB MF3/4 B Left -> Short Jumper -> CB MF 3/4 A Left
- Channel 4
  - Feeder (up VM4) -> Toe Board 2 -> Left Top Middle Rail -> Toe Board 1

Feeders and Jumpers

Feeders
- Feeder A-1 - 310cm
- Feeder A-2 - 310cm
- Feeder A-3 - 310cm
- Feeder A-4 - 310cm
- Feeder B-1 - 360cm
- Feeder B-2 - 360cm
- Feeder B-3 - 360cm
- Feeder B-4 - 711cm
- Feeder C-1 - 576cm
- Feeder C-2 - 576cm
- Feeder C-3 - 516cm
- Feeder C-4 - 687cm
Jumpers
- Jumper A-1 - 308cm
- Jumper A-2 - 262cm
- Jumper A-3 - 308cm
- Jumper A-4 - 262cm
- Jumper B-3 - 92cm
- Jumper B-4 - 152cm
- Jumper C-1.1 - 73cm
- Jumper C-1.2 - 142cm
- Jumper C-2.1 - 73cm
- Jumper C-2.2 - 142cm
- Jumper C-3 - 92cm

StrichLux Enclosures

Each StrichLux controller with its 4 output modules, 1 input module, and 1 power module will need an enclosure of some kind.
- Pelican case? Could do one larger one with all 3 controllers in it, or 3 smaller ones
- Assuming each StrichLux box has its own enclosure, would need a bunch of connections made through it:
  - Power - 2x12V @ 20A each - 4 20A power pins
  - Ethernet input - RJ45 - 1 RJ45
    - Will use M12 ethernet connectors (either from L-com or wherever else we're getting connectors) rather than RJ45s as they're cheap and IP67
      - Not RJ45-compatible, but an M12->RJ45 cable will be brought for troubleshooting, and they're not expensive
  - Strip outputs - SPI+5V - 2 signal pins, 2 10A power pins each x 4
    - JAE SRCN2A16-7S / SRCN6A16-7P would be good and extremely rugged, but the cost may be too high
      - Not weatherproof, doh!
    - Amphenol SINE MotionGrade M23/M40-series connectors look really nice, aren't too badly priced (compared with 5015 connectors anyway) and are weatherproof
      - They're really tall though, sticking out would negatively affect durability, so RT360 connectors might be better (but a bit more expensive)
    - Pricing is Receptacle, Sockets, Plus, Pins, Grip/Shell (* 4 per box * 3 boxes)
    - SINE M23: (6.46 + 0.728*4 + 8.430 + 0.640*4 + 3.61) * 4 = $95.88 * 3 = $287.64
    - SINE M40: (8.09 + 1.660*4 + 11.05 + 1.780*4 + 7.83) * 4 = $162.92 * 3 = $488.76
    - SINE RT360: (4.85 + 0.351*4 + 12.28 + 0.351*4 + 6.62) * 4 = $106.23 * 3 = $318.69
Molex MX150L will be used for inter-strip connections
- Reasonably priced
- Tooling is reasonably priced
- Matte sealed

Enclosure Connectors

Function	Description	Part #	Qty Req'd per Enclosure	Status
Ethernet Connector	Female Panel Mount Receptacle	CON-M124PF	1	Ordered
Power Connector	Male Flanged Receptacle	RT00144PNH	1	Ordered
Power Connector	Male Pins	SP12A1T	4	Ordered
Power Connector (mating)	Female Cable Plug	RT06144SNH	1	Ordered
Power Connector (mating)	Female Sockets	SS12A1T	4
LED Connector	Female Flanged Receptacle	RT00142SNH	4	Ordered
LED Connector	Female Power Sockets	SS12A1T	8
LED Connector	Female Signal Sockets	SS20M1T	8	Obtained
LED Connector (mating)	Male Cable Plug	RT06142PNH	4	Ordered
LED Connector (mating)	Male Power Pins	SP12A1T	8	Ordered
LED Connector (mating)	Male Signal Pins	SP20M1T	8	Obtained

Inter-Strip Connectors

Description	Part #	Qty Req'd	Status
Female Receptacle	19418-0019	51	Ordered
Female Crimp Socket	19420-0001	204
Male Plug	19419-0004	51	Ordered
Male Crimp Pin	19417-0047	204	Ordered

Test Setup

Want to be able to power the whole setup from AC power for configuration/testing/programming
- ATX power supplies provide plenty of +12V which could feed the PWR-DC5 modules
  - A modular supply like the OCX ZT-series would be cleanest, could modify the cables with Sabre connectors on the ends
  - Need 100W per channel, 200W per board, 600W total @ 12V
  - 100W per channel @ 12V means 8.33A
  - PCI-E and 8-pin CPU power connectors on ATX PSUs provide 6 amps per pin
    - PCI-E connectors have 3 pin pairs each
    - 8-pin CPU power connectors have 4 pin pairs each
  - Need four pins per board
    - Two boards get 8-pin CPU power -> Sabre connectors
    - The last board gets a 2xPCI-E power -> Sabre connector
  - OCZ ZT-series 750W power supply has all the required connectors

Cost

Item	Status	Cost
IO-DMX + IO-BO Rev. 1 PCBs	Obtained	$40.69
IO-DMX + IO-BO Parts	Obtained	$18.31
IO-SPI Rev. 1 PCBs	Obtained	$49.65
CORE + IO-ETH + PWR-DC5 PCBs	Obtained	$454.66
CORE + IO-SPI + IO-ETH + PWR-DC5 Parts	Obtained	$184.40
Test LED Strip	Obtained	$25.00
OCZ ZT 750W Test PSU	Obtained	$107.34
60m LPD8806 LED Strip	Obtained	$1320.00
Fit-PC 2i	Ordered	$455.00
Lightjams License (design PC)	Obtained	$78.59
Lightjams License (installation PC)	Future	$78.59
Ethernet Switch	Ordered	$363.85
2 sets of StrichLux IO-CORE + IO-ETH + PWR-DC5 Parts	Ordered	$512.83
12 sets of StrichLux IO-SPI Parts	Future	~$165.00
Enclosure A	Future	$62.15
Enclosures B-D	Future	$186.45
Enclosure Connectors (order 1)	Ordered	$563.09
Enclosure Connectors (order 2)	Ordered	~$50
Inter-Strip Connectors	Future (ordered, awaiting confirmation)	???
Total	Obtained	$4235.66
Total	Future	~$480.04
Grand Total		~$4715.70

Photos

Beacon4 Scaffold 3D Model

! Status ! Cost |- | IO-DMX + IO-BO Rev. 1 PCBs | Obtained | align=right | $40.69 |- | IO-DMX + IO-BO Parts | Obtained | align=right | $18.31 |- | IO-SPI Rev. 1 PCBs | Obtained | align=right | $49.65 |- | CORE + IO-ETH + PWR-DC5 PCBs | Obtained | align=right | $454.66 |- | CORE + IO-SPI + IO-ETH + PWR-DC5 Parts | Obtained | align=right | $184.40 |- | Test LED Strip | Obtained | align=right | $25.00 |- | OCZ ZT 750W Test PSU | Obtained | align=right | $107.34 |- | 60m LPD8806 LED Strip | Obtained | align=right | $1320.00 |- | fitPC 2i | Obtained | align=right | $455.00 |- | Lightjams License (design PC) | Obtained | align=right | $78.59 |- | Lightjams License (installation PC) | Future | align=right | $78.59 |- | Ethernet Switch | Ordered | align=right | $363.85 |- | 2 sets of StrichLux IO-CORE + IO-ETH + PWR-DC5 Parts | Ordered | align=right | $512.83 |- | 12 sets of StrichLux IO-SPI Parts | Future | align=right | ~$165.00 |- | Enclosure A | Future | align=right | $62.15 |- | Enclosures B-D | Future | align=right | $186.45 |- | Enclosure Connectors (order 1) | Ordered | align=right | $563.09 |- | Enclosure Connectors (order 2) | Ordered | align=right | ~$50 |- | Inter-Strip Connectors | Future (ordered, awaiting confirmation) | ??? |- | Total | Obtained | align=right | $4235.66 |- | Total | Future | align=right | ~$480.04 |- | Grand Total | | align=right | ~$4715.70 |}

Photos

Beacon4

Contents

Project Status

Outstanding Issues

Ideas/Plans

System Components

Power Details

Power Architecture

Lighting Layout

Random Notes

Dimensions

Idealized Layout

Actual Layout

LED Strip List

Reel Assignment

Cable Routing

Feeders and Jumpers

StrichLux Enclosures

Enclosure Connectors

Inter-Strip Connectors

Test Setup

Cost

Photos

Photos

Navigation menu

Views

Personal tools

Navigation

Search

Tools