StrichLux/PWR-DC5

From Hackstrich
Revision as of 15:42, 1 May 2012 by SarahEmm (talk | contribs) (Initial design thoughts.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The StrichLux PWR-DC5 module will take a DC input (5 or 12V) and output 5VDC @ 20A out on each high-power bus (total of 40A/200W).

Project Status

  • 2012-05-01: Started initial design.

Specs

  • At least 4.5-13.8V input (will depend on the DC-DCs used)
  • 200W / 20A output per bus
  • Most likely candidate for the DC-DC converters is the Lineage UVT020A0X3-SRZ
Retrieved from "http://hackstrich.sarahemm.net/wiki/index.php?title=StrichLux/PWR-DC5&oldid=1342"