I'm building a RepRap Huxley, printing parts on the HackLab's Makerbot.

Components

Status

2011-12-21: Did a bunch more hours of printing with no issues, also converted the frog plate (y-chassis2) from 3d printable STL to laserable DXF.
2011-12-11: Searched for a place to buy Sanguinololu PCBs, after shipping all of them are more expensive than just making them myself. Sent gerbers to Laen. Parts still need ordering. Ordered a hot end part set for the Universal Mini Extruder as I have no way to machine the brass parts required.
2011-12-09: Pololu order arrived, now have the steppers and drivers required. Still need to order Sanguinololu.
2011-12-06: More work on parts lists, printed a bunch of actual bot parts.
2011-12-05: Printed the fixed block with no issues. Started putting together parts lists.
2011-12-04: Printed all components for the extruder other than the fixed block. The duct-1 component failed 95% through the print, I think it should be okay as-is, but if not a separate extension piece could probably be added. Decided on Sanguinololu electronics, ordered 1x NEMA11 stepper, 3x NEMA14 steppers, and Pololu stepper drivers from Pololu. Still need to order Sanguinololu itself.

Part	Qty Req'd	Supplier
M3 washers	13
M4 washers	2
M6 washer	1
M3 nut	33	Fastenal?
M4 nut	1	Fastenal?
M6 wing nut	2
12mm M2.5 screws	4
30mm M3 cap screw	1	Fastenal?
10mm M3 grub/set screw	1
15mm M4 cap screws	2
80mm M6 bolt	1	Fastenal?
M3 threaded rod 40mm long	1
M3 threaded rod 55mm long	4
M3 threaded rod 80mm long	2
Wire spring - 1mm wire, 4mm ID, 12mm long	1
626 bearing (6x19x6)	2
623 bearing (3x10x4)	1

Part	Qty Req'd	Supplier
M3x20 Screw	Some	Fastenal?
M3x30 Screw	Some	Fastenal?
M6 Locknut	100
M6 Nut	100	Fastenal?
M3 Nut	100	Fastenal?
M6x25 Washer	50
M3x30 Washer	50
M3 Washer	250
M6 Washer	250
M6 Threaded Rod - 1m	2
Smooth Rod (???)	???
626 Bearing	2
623 Bearing	30