Difference between revisions of "Huxley"

From Hackstrich
(Found a supplier for the brass/PEEK parts of the hot end, so I can use the Universal Mini as I'd wanted to.)
(Parts list for the extruder's cold end.)
Line 7: Line 7:
 
= Status =
 
= Status =
 
* 2011-12-04: Printed all components for the extruder other than the fixed block.  The duct-1 component failed 95% through the print, I think it should be okay as-is, but if not a separate extension piece could probably be added.  Decided on Sanguinololu electronics, ordered 1x NEMA11 stepper, 3x NEMA14 steppers, and Pololu stepper drivers from Pololu.  Still need to order Sanguinololu itself.
 
* 2011-12-04: Printed all components for the extruder other than the fixed block.  The duct-1 component failed 95% through the print, I think it should be okay as-is, but if not a separate extension piece could probably be added.  Decided on Sanguinololu electronics, ordered 1x NEMA11 stepper, 3x NEMA14 steppers, and Pololu stepper drivers from Pololu.  Still need to order Sanguinololu itself.
 +
 +
= Parts Lists =
 +
== Extruder Cold End ==
 +
{| class="wikitable sortable" border="1"
 +
!Part
 +
!Qty Req'd
 +
!Supplier
 +
!Status
 +
|-
 +
|M3 washers
 +
|13
 +
|
 +
|
 +
|-
 +
|M4 washers
 +
|2
 +
|
 +
|
 +
|-
 +
|M6 washer
 +
|1
 +
|
 +
|
 +
|-
 +
|M3 nut
 +
|33
 +
|
 +
|
 +
|-
 +
|M4 nut
 +
|1
 +
|
 +
|
 +
|-
 +
|M6 wing nut
 +
|2
 +
|
 +
|
 +
|-
 +
|12mm M2.5 screws
 +
|4
 +
|
 +
|
 +
|-
 +
|30mm M3 cap screw
 +
|1
 +
|
 +
|
 +
|-
 +
|10mm M3 grub/set screw
 +
|1
 +
|
 +
|
 +
|-
 +
|15mm M4 cap screws
 +
|2
 +
|
 +
|
 +
|-
 +
|80mm M6 bolt
 +
|1
 +
|
 +
|
 +
|-
 +
|M3 threaded rod 40mm long
 +
|1
 +
|
 +
|
 +
|-
 +
|M3 threaded rod 55mm long
 +
|4
 +
|
 +
|
 +
|-
 +
|M3 threaded rod 80mm long
 +
|2
 +
|
 +
|
 +
|-
 +
|Wire spring - 1mm wire, 4mm ID, 12mm long
 +
|1
 +
|
 +
|
 +
|-
 +
|626 bearing (6x19x6)
 +
|2
 +
|
 +
|
 +
|-
 +
|623 bearing (3x10x4)
 +
|1
 +
|
 +
|
 +
|}
  
 
[[Category:Projects]]
 
[[Category:Projects]]

Revision as of 04:11, 6 December 2011

I'm building a RepRap Huxley, printing parts on the HackLab's Makerbot.

Components

  • Extruder/Hot End: Universal Mini Extruder modified for bowden cable
  • Electronics: Sanguinololu

Status

  • 2011-12-04: Printed all components for the extruder other than the fixed block. The duct-1 component failed 95% through the print, I think it should be okay as-is, but if not a separate extension piece could probably be added. Decided on Sanguinololu electronics, ordered 1x NEMA11 stepper, 3x NEMA14 steppers, and Pololu stepper drivers from Pololu. Still need to order Sanguinololu itself.

Parts Lists

Extruder Cold End

Part Qty Req'd Supplier Status
M3 washers 13
M4 washers 2
M6 washer 1
M3 nut 33
M4 nut 1
M6 wing nut 2
12mm M2.5 screws 4
30mm M3 cap screw 1
10mm M3 grub/set screw 1
15mm M4 cap screws 2
80mm M6 bolt 1
M3 threaded rod 40mm long 1
M3 threaded rod 55mm long 4
M3 threaded rod 80mm long 2
Wire spring - 1mm wire, 4mm ID, 12mm long 1
626 bearing (6x19x6) 2
623 bearing (3x10x4) 1
Retrieved from "http://hackstrich.sarahemm.net/wiki/index.php?title=Huxley&oldid=875"