Difference between revisions of "Huxley"
From Hackstrich
(Huxley!) |
(Found a supplier for the brass/PEEK parts of the hot end, so I can use the Universal Mini as I'd wanted to.) |
||
| Line 2: | Line 2: | ||
= Components = | = Components = | ||
| − | * Extruder: Universal Mini Extruder modified for bowden cable | + | * Extruder/Hot End: Universal Mini Extruder modified for bowden cable |
| − | |||
* Electronics: Sanguinololu | * Electronics: Sanguinololu | ||
= Status = | = Status = | ||
| − | * 2011-12-04: Printed all components for the extruder other than the fixed block. The duct-1 component failed 95% through the print, I think it should be okay as-is, but if not a separate extension piece could be added. Decided on Sanguinololu electronics, ordered 1x NEMA11 stepper, 3x NEMA14 steppers, and Pololu stepper drivers from Pololu. Still need to order Sanguinololu itself. | + | * 2011-12-04: Printed all components for the extruder other than the fixed block. The duct-1 component failed 95% through the print, I think it should be okay as-is, but if not a separate extension piece could probably be added. Decided on Sanguinololu electronics, ordered 1x NEMA11 stepper, 3x NEMA14 steppers, and Pololu stepper drivers from Pololu. Still need to order Sanguinololu itself. |
[[Category:Projects]] | [[Category:Projects]] | ||
Revision as of 11:47, 5 December 2011
I'm building a RepRap Huxley, printing parts on the HackLab's Makerbot.
Components
- Extruder/Hot End: Universal Mini Extruder modified for bowden cable
- Electronics: Sanguinololu
Status
- 2011-12-04: Printed all components for the extruder other than the fixed block. The duct-1 component failed 95% through the print, I think it should be okay as-is, but if not a separate extension piece could probably be added. Decided on Sanguinololu electronics, ordered 1x NEMA11 stepper, 3x NEMA14 steppers, and Pololu stepper drivers from Pololu. Still need to order Sanguinololu itself.
