Difference between revisions of "IOstrich"
From Hackstrich
(Adding the stacking info.) |
(Adding voltage select stuff.) |
||
| Line 10: | Line 10: | ||
}} | }} | ||
| − | The IOstrich will provide 40 GPIOs, based on the [[HackTrack Shield]]. Up to 8 of these shields can (theoretically) be stacked on one Arduino, giving a total of 320 added-on GPIOs. | + | The IOstrich will provide 40 GPIOs, based on the [[HackTrack Shield]]. Up to 8 of these shields can (theoretically) be stacked on one Arduino, giving a total of 320 added-on GPIOs. The shield can be used in either 3.3v or 5v mode, and is 5v-tolerant in both modes. |
== Project Status == | == Project Status == | ||
Revision as of 06:35, 18 September 2011
| 200px | |
| This Page | |
| Function: | Provide 40 GPIOs, accessible via I2C. |
|---|---|
| Key Chips: | NXP PCA9505 |
| External Ports: | 40x GPIO |
| Required Pins: | A4 (I2C SDA), A5 (I2C SCL) |
| Optional Pins: | D2, D3 (Interrupts) |
The IOstrich will provide 40 GPIOs, based on the HackTrack Shield. Up to 8 of these shields can (theoretically) be stacked on one Arduino, giving a total of 320 added-on GPIOs. The shield can be used in either 3.3v or 5v mode, and is 5v-tolerant in both modes.
Project Status
- 2011-09-17: Forked HackTrack Shield to create IOstrich, completed changes to schematic, completely redesigned PCB layout, and BOM is now on file at Digikey. Will do the final checklist review and submit to Laen tomorrow.
