Difference between revisions of "MeterBoard/CPUE"

Revision as of 15:18, 16 April 2015

MeterBoard/CPUE is the CPU+Ethernet module for the MeterBoard system.

2015-04-14: Implemented SNMP support, can do SETs to set the first 4 meters using test code :D
2015-04-11: Got Ethernet sorted out finally, was a software issue w/ the newest Microchip TCP/IP stack. Can now ping/telnet to the board.
2015-03: Built board, SPI tests OK, Ethernet gets link but has no packets move. Still troubleshooting.
2014-12: Sent off CAM files, boards received.
2014-12-08: Finished routing board, silkscreen done, checklist run. Now 24h waiting period before CAM processing.
2014-12-07: More routing completed.
2014-11-22: Schematic completed/checklisted, started routing board.
2014-11-12: Started putting together initial design/BOM/schematic.

10/100 Ethernet for control
Optional PoE to power the whole system
- If not using PoE, regular barrel jack to power the system
8 SPI Link ports to connect to I/O modules
- Share one bus, each just has their own nSS
2 I2C ports for future expansion
- Each are separate busses

@@ Line 2: / Line 2: @@
 == Status ==
+* 2015-04-14: Implemented SNMP support, can do SETs to set the first 4 meters using test code :D
+* 2015-04-11: Got Ethernet sorted out finally, was a software issue w/ the newest Microchip TCP/IP stack. Can now ping/telnet to the board.
 * 2015-03: Built board, SPI tests OK, Ethernet gets link but has no packets move. Still troubleshooting.
 * 2014-12: Sent off CAM files, boards received.