Difference between revisions of "UCBeacon"

From Hackstrich
(Updating to current status.)
Line 2: Line 2:
  
 
== Project Status ==
 
== Project Status ==
 +
* 2016-09: Bought a kit to make silicone parts, the ring of SatinIce acrylic is way too thin-walled to be useful, so going to try to make it out of platinum silicone instead.
 +
* 2016-09-07: Hackvana PCB price (all USD): green soldermask 5 boards $71, 10 boards $100, black soldermask 5 boards $98, 10 boards $127.
 
* 2016-09-06: Completed checklist and CAM, sent quote request to Hackvana as this will be >$200 just for PCBs at OSH Park, so need to find elsewhere to get them done.
 
* 2016-09-06: Completed checklist and CAM, sent quote request to Hackvana as this will be >$200 just for PCBs at OSH Park, so need to find elsewhere to get them done.
 
* 2016-08-27: Added silkscreen and started checklist run.
 
* 2016-08-27: Added silkscreen and started checklist run.
Line 17: Line 19:
 
* LED ring like on [http://www.parking-net.com/Upload/ContentManagersPictures/ParkAssist/GreenLightRedLight3.jpg ParkAssist lights], but all RGB
 
* LED ring like on [http://www.parking-net.com/Upload/ContentManagersPictures/ParkAssist/GreenLightRedLight3.jpg ParkAssist lights], but all RGB
 
* Round solar panel inside ring to power it?
 
* Round solar panel inside ring to power it?
 +
** Turns out to be hard to find, so may not be able to do this
 
* LT3652 solar charging IC
 
* LT3652 solar charging IC
* 2x 18500 LiFePo4 cylindrical batteries in parallel?
+
* 2x 18500 LiFePo4 cylindrical batteries in parallel
 
* Remote control to go from "subtle help-us-find-camp beacon" to a brighter mode, or disable when not at camp
 
* Remote control to go from "subtle help-us-find-camp beacon" to a brighter mode, or disable when not at camp
 
* Arduino-compatible, based on ATMega328P
 
* Arduino-compatible, based on ATMega328P
 
* On at dusk and off at dawn based on solar panel voltage rather than a separate sensor
 
* On at dusk and off at dawn based on solar panel voltage rather than a separate sensor
 
* Need to think about weatherproofing and drainage since it will get rained on and the ring design would otherwise trap water
 
* Need to think about weatherproofing and drainage since it will get rained on and the ring design would otherwise trap water
 +
 +
== Gallery ==
 +
<gallery widths=160px>
 +
Image:UCBeacon-0.png|First concept model of UCBeacon, before switching ring to silicone.
 +
</gallery>
  
 
[[Category:Current Projects]]
 
[[Category:Current Projects]]

Revision as of 16:46, 11 January 2017

We need a new beacon to identify a campsite in a dark location, so it needs to be more subtle than the previous Burning Man-oriented designs.

Project Status

  • 2016-09: Bought a kit to make silicone parts, the ring of SatinIce acrylic is way too thin-walled to be useful, so going to try to make it out of platinum silicone instead.
  • 2016-09-07: Hackvana PCB price (all USD): green soldermask 5 boards $71, 10 boards $100, black soldermask 5 boards $98, 10 boards $127.
  • 2016-09-06: Completed checklist and CAM, sent quote request to Hackvana as this will be >$200 just for PCBs at OSH Park, so need to find elsewhere to get them done.
  • 2016-08-27: Added silkscreen and started checklist run.
  • 2016-08-22: Completed routing board, need to do silk and checklist.
  • 2016-08-17: Completed schematic checklist, added USB power option, started working on routing the PCB.
  • 2016-08-04: Completed the schematic, pending checklist.
  • 2016-08-03: Completed the charging section, last major section left is the power supply.
  • 2016-08-02: Started putting basic schematic and BOM together.
  • 2016-06-13: Ordered a 12" section of 8" diameter SatinIce acrylic tube to use for the ring.
  • 2016-06-12: Started looking at how to source the acrylic for the LED ring.
  • 2016-06-04: Started talking about a need for this and thinking about designs.

Overview

  • Small portable-ish unit that can sit on top of the trailer at camp.
  • LED ring like on ParkAssist lights, but all RGB
  • Round solar panel inside ring to power it?
    • Turns out to be hard to find, so may not be able to do this
  • LT3652 solar charging IC
  • 2x 18500 LiFePo4 cylindrical batteries in parallel
  • Remote control to go from "subtle help-us-find-camp beacon" to a brighter mode, or disable when not at camp
  • Arduino-compatible, based on ATMega328P
  • On at dusk and off at dawn based on solar panel voltage rather than a separate sensor
  • Need to think about weatherproofing and drainage since it will get rained on and the ring design would otherwise trap water

Gallery