StrichLux/IO-ETH

From Hackstrich
Revision as of 14:08, 24 April 2012 by SarahEmm (talk | contribs) (Initial planning for the Art-Net module.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The StrichLux IO-ArtNet module will provide 1-4 universes of input or output via Art-Net. This module can "take over" adjacent channels if configured to, so that only one module is needed for a complete StrichLux system.

Project Status

  • 2012-04-24: Started initial planning.

Specs

  • Based around the PIC32MX664F128H microcontroller as there is no economical way to do Ethernet on FPGAs for low-cost designs
  • This micro has no EEPROM (?!) so will need external I2C EEPROM for storing config data
  • Also needs external PHY