Difference between revisions of "StrichLux/IO-Breakout"

From Hackstrich
(Starting IO-Breakout project.)
 
 
(One intermediate revision by the same user not shown)
Line 2: Line 2:
  
 
== Project Status ==
 
== Project Status ==
* 2012-03-17: Started initial design.
+
* 2012-04: Ordered/received parts, built breakout board, successfully using it to test [[StrichLux/IO-DMX]].  Going to call this completed, as there's not much that could need changing.
 +
* 2012-03-17: Completed design, BOM, schematic, board layout, and CAM.  Submitted rev. 1 board to Laen for manufacturing.  Parts still need to be ordered.
  
  
[[Category:Current Projects]]
+
[[Category:Completed Projects]]
[[Category:Status/Initial Design]]
 

Latest revision as of 04:30, 21 April 2012

The StrichLux IO-Breakout module is a "sandwich" module that plugs into the Core Board and lets an I/O module plug into it, providing breakouts for all signals. This is used for troubleshooting and for developing new modules, as well as using modules in a standalone form without a Core Board, or troubleshooting the Core Board without any modules.

Project Status

  • 2012-04: Ordered/received parts, built breakout board, successfully using it to test StrichLux/IO-DMX. Going to call this completed, as there's not much that could need changing.
  • 2012-03-17: Completed design, BOM, schematic, board layout, and CAM. Submitted rev. 1 board to Laen for manufacturing. Parts still need to be ordered.