Difference between revisions of "Solder Paste Dispenser"
From Hackstrich
(Waiting for parts now.) |
|||
| Line 2: | Line 2: | ||
== Project Status == | == Project Status == | ||
| − | Parts have arrived, | + | Parts have arrived, dispenser controller needs a new power input module and fuse holder, which are now on order w/ Digikey. |
== Goals/Requirements == | == Goals/Requirements == | ||
| Line 14: | Line 14: | ||
[[Category:Current Projects]] | [[Category:Current Projects]] | ||
| − | [[Category:Status/Waiting for | + | [[Category:Status/Waiting for Parts]] |
Revision as of 13:56, 14 November 2010
The Solder Paste Dispenser project's aim is to assemble a device that can be used to easily apply solder paste to boards using minimal manual effort.
Project Status
Parts have arrived, dispenser controller needs a new power input module and fuse holder, which are now on order w/ Digikey.
Goals/Requirements
- Operate independently of a shop air source
- Dispense using a foot pedal or finger switch
- Have minimal parts so it can be stored in a small bin at the lab
System Plan
- Small (1/4 gallon) air tank, can charge using a schraeder valve from a tire pump
- EFD 2000XL dispenser controller
