Difference between revisions of "Skating Lap Counter"

From Hackstrich
(Setting dormant for now.)
 
(7 intermediate revisions by the same user not shown)
Line 2: Line 2:
  
 
= Project Status =
 
= Project Status =
* 2014-06-29: Completed routing TX PCB and checklisted it.
+
* 2015-09-12: Putting this on the back burner since I don't have time for it and have been off-skates injured for 6 months now anyways.
 +
* 2014-08-05: Boards are here! Likely won't get to this until after burn though.
 +
* 2014-07-07: Checklisted and sent to OSH Park.
 +
* 2014-07-06: Finished all routing for the RX board. Need to do silk and run the checklist still, then can send both RX and TX to OSH Park.
 +
* 2014-07-05: Redid DC/DC to a buck/boost design, added silkscreen LCD template. Started component placement.
 +
* 2014-07-04: Added buzzer and associated circuitry.
 +
* 2014-07-03: Almost finished the RX schematic, but realized I forgot the audio signaller and that the DC-DC chosen is buck-only and needs to be buck/boost.
 +
* 2014-07-01: More work on the RX, getting close to done the schematic side.
 +
* 2014-06-30: Worked on the design/BOM/schematic for the RX more.
 +
* 2014-06-29: Completed routing TX PCB and checklisted it. Started designing the RX.
 
* 2014-06-28: Started putting idea together, designed transmitter BOM/schematic, started working on PCB layout. 5 airwires left.
 
* 2014-06-28: Started putting idea together, designed transmitter BOM/schematic, started working on PCB layout. 5 airwires left.
  
Line 9: Line 18:
 
** IR emitter, microcontroller, and battery
 
** IR emitter, microcontroller, and battery
 
** When switched on, transmits a code repeatedly
 
** When switched on, transmits a code repeatedly
** Rechargable via USB
+
** Rechargeable via USB
 
* Base unit with an IR receiver and display
 
* Base unit with an IR receiver and display
 
** Shows how many times each skate module has passed by
 
** Shows how many times each skate module has passed by
 +
** USB rechargeable and USB data interface for possible future use
  
[[Category:Current Projects]]
+
[[Category:Dormant Projects]]

Latest revision as of 18:28, 12 September 2015

Skating Lap Counter is a project to automate counting laps skated on a derby track.

Project Status

  • 2015-09-12: Putting this on the back burner since I don't have time for it and have been off-skates injured for 6 months now anyways.
  • 2014-08-05: Boards are here! Likely won't get to this until after burn though.
  • 2014-07-07: Checklisted and sent to OSH Park.
  • 2014-07-06: Finished all routing for the RX board. Need to do silk and run the checklist still, then can send both RX and TX to OSH Park.
  • 2014-07-05: Redid DC/DC to a buck/boost design, added silkscreen LCD template. Started component placement.
  • 2014-07-04: Added buzzer and associated circuitry.
  • 2014-07-03: Almost finished the RX schematic, but realized I forgot the audio signaller and that the DC-DC chosen is buck-only and needs to be buck/boost.
  • 2014-07-01: More work on the RX, getting close to done the schematic side.
  • 2014-06-30: Worked on the design/BOM/schematic for the RX more.
  • 2014-06-29: Completed routing TX PCB and checklisted it. Started designing the RX.
  • 2014-06-28: Started putting idea together, designed transmitter BOM/schematic, started working on PCB layout. 5 airwires left.

Architecture

  • Small module that attaches to one skate
    • IR emitter, microcontroller, and battery
    • When switched on, transmits a code repeatedly
    • Rechargeable via USB
  • Base unit with an IR receiver and display
    • Shows how many times each skate module has passed by
    • USB rechargeable and USB data interface for possible future use