Difference between revisions of "HackLab.TO Rb Frequency Reference"

From Hackstrich
Line 2: Line 2:
  
 
= Status =
 
= Status =
 +
* 2012-01-02: Got everything hooked up and fixed some bugs in the buffer board.  Now seems to be working.  Need to get meters and an enclosure.
 
* 2012-01-01: Breadboarded up the buffers for the monitoring signals using an LM324 we had laying around, then committed the first part of the signal conditioning board to perfboard.
 
* 2012-01-01: Breadboarded up the buffers for the monitoring signals using an LM324 we had laying around, then committed the first part of the signal conditioning board to perfboard.
 
* 2012-12-31: Started planning/putting together specs for the finished product.
 
* 2012-12-31: Started planning/putting together specs for the finished product.

Revision as of 00:16, 4 February 2013

This project will be to build a 1U Rubidium 10MHz Frequency Reference for the lab, using an Efratom LPRO-101 reference module. This will be used as our house 10MHz reference, initially to run the system timer of tick.hacklab.to.

Status

  • 2012-01-02: Got everything hooked up and fixed some bugs in the buffer board. Now seems to be working. Need to get meters and an enclosure.
  • 2012-01-01: Breadboarded up the buffers for the monitoring signals using an LM324 we had laying around, then committed the first part of the signal conditioning board to perfboard.
  • 2012-12-31: Started planning/putting together specs for the finished product.

Desired Features / Specs

  • Half-width 2U Enclosure (likely Hammond RMCS9038BK1)
    • Front:
      • Analog round meter for Lamp Volts (0-15V w/ 6-9V normal range, 3-14V warning range)
      • Analog round meter for VCXO Volts (0-15V w/ 0.5 - 13.3V normal range)
      • Analog edgewise meter for system temperature
      • LED for Atomic Lock
      • LED for Overheat
    • Back:
      • Fused IEC C14 Power Input
      • 10MHz Buffered Sine 0.5V Output
      • 10MHz Buffered TTL 5V Output
    • Internal:
      • Power supply (19V @ 1.75A ignition, 1.25A warmup for ~5mins, 0.5A running)
      • Buffering for Sine output
      • Buffering/conversion to 5V TTL output
      • Signal conditioning board, containing:
        • Buffering for the Lamp Volts meter
        • Buffering for the VCXO Volts meter
        • Buffering for the Atomic Lock LED
        • Temperature monitoring circuit