Difference between revisions of "ECLair"

From Hackstrich
m
Line 2: Line 2:
  
 
== Project Status ==
 
== Project Status ==
 +
* 2014-05-31: sub8.ab now works and passes all its unit tests (and added some more unit tests for it, to be safe/confident). Next step is finishing CALL/RET.
 
* 2014-05-30: pop16.pc now working/passing its unit tests, sub8.ab still being worked on.
 
* 2014-05-30: pop16.pc now working/passing its unit tests, sub8.ab still being worked on.
 
* 2014-05-18: Worked on pop16.pc microcode and sub8.ab microcode. Neither working yet.
 
* 2014-05-18: Worked on pop16.pc microcode and sub8.ab microcode. Neither working yet.
Line 287: Line 288:
 
| 44
 
| 44
 
| 1
 
| 1
| AVAILABLE FOR USE
+
| Carry In
|  
+
| Carry input for the ALU. Used to carry in a 1 to let the ALU subtract.
 
|-
 
|-
 
| 45
 
| 45

Revision as of 22:21, 31 May 2014

ECLair is a long-term project to build an ECL minicomputer. All code/formal documentation/utilities can be found in the ECLair GitHub Repository.

Project Status

  • 2014-05-31: sub8.ab now works and passes all its unit tests (and added some more unit tests for it, to be safe/confident). Next step is finishing CALL/RET.
  • 2014-05-30: pop16.pc now working/passing its unit tests, sub8.ab still being worked on.
  • 2014-05-18: Worked on pop16.pc microcode and sub8.ab microcode. Neither working yet.
  • 2014-05-06: Figured out register flow requirements for pop16.pc, documented. Next step is to implement the test and microcode for it.
  • 2013-12-29: Implemented include functionality in mcgen.rb so that instruction like call which are really just push16.pc then jmp can be written like that, rather than having to copy/paste the contents of those other instructions.
  • 2013-12-26: Implemented CALL and extended mcgen.rb to generate a mapping file from control store address to instruction, which can be loaded into gtkwave. Next steps are to implement POP and RET.
  • 2013-05-05: Refactored all microcode instructions and their unit tests so that PC now equals the instruction currently being executed, and not the memory location after that. Implemented push16.pc and its unit test. Next step is to implement CALL.
  • 2013-05-04: Reworked PUSH into push8.imm and push8.? (for future implementation of other non-immediate push8s). Implemented push16.imm and push16.? including their unit test and register transfer diagram. Started working on push16.pc, but ran into an issue where PC is incremented within FETCH, so if we push it as part of push16.pc then we're actually pushing PC+1. Need to figure out if that's okay, or if we need to rework where inc_pc is triggered in the fetch process.
  • 2013-02-24: Finished implementing PUSH, including the unit test for it. All working now, and fixed a lot of bugs related to RAM while doing so, as this is the first use of RAM in the system. Next step is to go back to working on CALL/RETURN now that PUSH is working.
  • 2013-02-20: Started working on the unit test for PUSH, found that I hadn't ever implemented the SP register. Did so, and troubleshot a bunch around that. Test still not passing, more troubleshooting required.
  • 2013-02-19: Added proposed microcode for PUSH, which is a prerequisite for CALL/RETURN. Next step is to write a useful unit test for it.
  • 2013-02-17: Figured out/diagrammed initial interrupt logic. Next step is to implement CALL/RETURN, which will be needed to integrate it into the system.
  • 2013-01-16: Added supervisor/user mode support and a test for it. All working. Still need to write a branch-if-CO unit test.
  • 2013-01-08: Added conditional branch support and a test for it. Currently only have a test for the branch-if-Z path, not the branch-if-CO path. Next step is to add that branch-if-CO unit test, then probably work on fault/trap/interrupt support.
  • 2013-01-06: Added support for ALU status bits Z (last operation result was zero) and OC (overflow/carry out) and tests for them. Also added add8.ab. Next step is adding conditional branch support.
  • 2013-01-05: Wrote a new unit test system, and implemented tests for all current instructions. Next step is probably to look at implementation of ALU status bits.
  • 2012-12-26: Implemented ldi8.flags so that paging can be turned on. Fixed a couple bugs in the system, now paging works! Also renamed PID to PTB (page table block) as one PID could potentially use more than one page table entry. Still need to figure out how to automatically test this.
  • 2012-12-25: Worked out details on the paging system, added it to the schematic, implemented it. Can now ldi8.pid to load the current PID into the PID register, then wrpte to load the first entry in the page table. Can't yet switch paging on, as status/flags isn't implemented yet. Next step is figuring out how to integrate paging mechanism into the automated tests, then implement status/flags so paging can actually be turned on.
  • 2012-12-23: Worked out the right way to fix the sequencing issue/dependency between microcode signals, now the level-sensitive signals (bits 0-23) latch first, then the edge-sensitive signals (bits 24-63) latch, then the edge-sensitive signals are reset back to 0 so they don't mis-trigger when the level-sensitive signals change again on the next cycle. This means all edge-sensitive signals need to be active-high, but that hasn't been an issue so far.
  • 2012-12-22: Hacked on the sequencing issue more, no real progress.
  • 2012-12-21: Reordered microcode bits into 24 bits for edge-sensitive signals and 40 for level-sensitive signals. Redesigned the microcode sequencer to use a latch and an always-populated next_addr bit field rather than a counter, which solves many problems around jumping and runt cycles. Still don't have sequencing of the two classes of microcode bits worked out, it's proving a much harder problem than I'd expected.
  • 2012-12-20: Implemented realistic propagation delays for most parts (main EPROM and ALU not done yet), and fixed a bunch of bugs related to previous lack of delays. Have a hacked-in delay for cs_jump right now, next step is to split the microcode into 24 "edge-sensitive signal bits" and 40 "level-sensitive signal bits", and clock the former slightly after the latter. This will avoid needing two separate microcode instructions to set up level-sensitive signals then trigger the edge-sensitive ones. Will mean a complete reorganization order-wise of the microcode though.
  • 2012-12-19: Finished implementing 8/16-bit width selection and got the bugs worked out. Now have 8-bit and 16-bit immediate loads, and 8-bit don't trash the other 8 bits of the destination register. Still need to get 8-bit high-byte load implemented. Next step though is probably to rethink the hold_last function in the microcode assembler, should probably make it more intelligent to only hold level sensitive signals and leave the edge-sensitive ones out.
  • 2012-12-18: Half-implemented 8/16-bit width selection using a microcode bit. Doesn't work yet.
  • 2012-12-17: Implemented a data path from IR[7:6] to the register latch signals, so that all register-related operations can be simplified in microcode. Moved the ldi* instructions to use this new path, everything is tested and working. Next step is probably to get the 8/16-bit split working, so that 8-bit operations don't erase the other byte of the word.
  • 2012-12-16: MDR-XY data path implemented, Load Immediate 8-bit values to A and B instructions written, add 16-bit A=A+B written, all working.
  • 2012-12-15: Found bug in the datasheet of the MC10H181, fixed it and now the ALU checks out completely. Started integrating it into the CPU. Next step is to finish the MDR-XY data path so that Load Immediate instruction can be implemented, then Add can be implemented/tested.
  • 2012-12-14: Verilog transcription of ALU almost complete, but malfunctioning in the carry logic of the second bit. Will be using MC10H181 w/ MC10H179 CLA generator.
  • 2012-12-09: Started working on ALU design/verilog transcription.
  • 2012-12-08: Added decode support for ROM/RAM/device memory, got everything working so that now an instruction is fetched from ROM at startup and is jumped to in microcode. Started work on the X/Y registers, and started work on a microcode generator so I can stop typing in individual bits.
  • 2012-12-05: Got the part that's been diagrammed into Verilog and working. Now fetches instructions (from a constant right now, not RAM yet) and does jumps to their location in microcode.
  • 2012-12-04: Started the logical diagram and the microcode layout.
  • 2012-12-01/02: Spent the weekend reading Bit-Slice Microprocessor Design.
  • 2012-11-24: Basic ideas/architecture starting to get put together.

Architecture Overview

  • Many blinkie lights and switches on the front panel
  • MECL-based (10KH/10KE levels/speeds)
  • 25MHz main clock (hopefully)
  • 8-bit data width
  • 24-bit physical address, 16-bit virtual address
  • DMA support (for front panel)
  • Microcoded, running control store in SRAM for speed
    • Unless I can find equally-fast EPROMs
    • Copied to SRAM from EPROM before the system releases reset on powerup
  • 8 interrupt lines (heartbeat, RTC, serial 0, serial 1, storage, 3 for future use)

Registers

Name Width (bits) Function
PC 16 Program Counter
SP 16 Stack Pointer
PTB 6 Page Table Block
IR 8 Instruction Register
MAR 16 Memory Address Register
MDR 8 Memory Data Register
FLAGS/STATUS 16 System flags and status bits (8 bits for R/W flags, 8 for R/O status)
A 16 General Purpose
B 16 General Purpose
C 16 General Purpose
D 16 General Purpose
X 16 ALU Input
Y 16 ALU Input
Z 16 ALU Output


Memory Map

  • 24bit / 16MB address space
  • 14MB for RAM, 1MB for ROM, 1MB for memory-mapped devices
  • 0x000000 - 0xEFFFFF - ROM
  • 0x100000 - 0x0FFFFF - RAM
  • 0x200000 - 0x1FFFFF - RAM
  • 0x300000 - 0x2FFFFF - RAM
  • 0x400000 - 0x3FFFFF - RAM
  • 0x500000 - 0x4FFFFF - RAM
  • 0x600000 - 0x5FFFFF - RAM
  • 0x700000 - 0x6FFFFF - RAM
  • 0x800000 - 0x7FFFFF - RAM
  • 0x900000 - 0x8FFFFF - RAM
  • 0xA00000 - 0x9FFFFF - RAM
  • 0xB00000 - 0xAFFFFF - RAM
  • 0xC00000 - 0xBFFFFF - RAM
  • 0xD00000 - 0xCFFFFF - RAM
  • 0xE00000 - 0xDFFFFF - RAM
  • 0xF00000 - 0xFFFFFF - Devices

Page Table

  • 64 process slots available in page table
  • Each process gets access to 64 pages
  • Each page is 1K long
  • Bit 15 (MSB) in page table entry is 1 if page is present
  • Bit 14 is in page table entry 1 if page is writable
  • Address Routing
    • Virtual address - 16 bits
      • Bits 15-10 - Page Select - passed to page table address bits 11-6
      • Bits 9-0 - Address - passed to ADDR LSB as-is
    • Physical address - 24 bits
      • Bits 23-10 - Page - passed from page table data bits 13-0
      • Bits 9-0 - Address - passed from virtual address bits 9-0

Flags/Status

High Byte - Flags

  • Bit 8 - PE - Paging Enabled
  • Bit 7 - M - Mode (User/Supervisor)

Low Byte - Status

  • Bit 1 - CO - Carry/Overflow
  • Bit 0 - Z - Last Result is Zero

Microcode Layout

Bit # Width Function Details
Edge Sensitive Signals
0 1 Write Page Table Entry
1 1 MDR Load Latches data or Z (determined by bit 34) into byte of MDR (determined by bit 49)
2 1 AVAILABLE FOR USE
3 1 MAR Load MAR latch load (source specified by bit 33)
4 1 IR Load IR latch load from data bus
5 1 PC Increment Increment PC by 1
6 1 PC Load PC counter load from Z
7-9 3 Register Load from Z 000 - None
001 - A
010 - B
011 - C
100 - D
101 - SP
111 - Value from IR[6..7] (only A-D)
10 1 X Load
11 1 Y Load
12 1 Z Load
13 1 PTB Load
14 1 Load Flags from Z
15 1 Load Status from ALU
16 1 Clear Interrupt Flags from Z 1 bit in Z clears that interrupt flag
17 1 RAM Write
Level Sensitive Signals
24 1 X/Y Immediate LSB Used if 40-42 = 000
25-32 8 Next CS Address 0 = Use IR
33 1 MAR Source low = Z, high = PC
34 1 MDR Source low = Z, high = data bus
35 1 ALU Mode 0 = Arithmetic, 1 = Logic
36-39 4 ALU Operation 1111 - Z=X
40-42 3 X/Y Register Source 000 - Immediate Value (LSB from bit 24)
001 - A
010 - B
011 - C
100 - D
101 - SP
110 - MAR
111 - MDR
43 1 RAM Read
44 1 Carry In Carry input for the ALU. Used to carry in a 1 to let the ALU subtract.
45 1 Operation Width 0 = 8-bit, 1 = 16-bit
46-48 3 Branch Condition 000 - Unconditional
001 - Z
002 - OC
49 1 MDR Byte Select low = low byte for 8bit ops, high = high byte for 8bit ops