Difference between revisions of "CubeLoop"
From Hackstrich
(Initial design ideas for CubeLoop.) |
(Remote mute input would be really handy. Also should use binding posts for the loop, not the push-in speaker connectors.) |
||
| Line 1: | Line 1: | ||
The CubeLoop will be an induction loop amplifier designed for small spaces (like a cubicle). It will have: | The CubeLoop will be an induction loop amplifier designed for small spaces (like a cubicle). It will have: | ||
| − | * Driving capability for a ~10m loop length (at two turns). | + | * Driving capability for a ~10m loop length (at two turns), connected via binding posts. |
* Inputs for telephone via a handset connector and two audio inputs via minijacks. | * Inputs for telephone via a handset connector and two audio inputs via minijacks. | ||
| + | * Mute switch and a remote mute input (for a "get my attention" switch). | ||
* Mains powered with an IEC C14 connector for the input. | * Mains powered with an IEC C14 connector for the input. | ||
Revision as of 14:03, 1 May 2010
The CubeLoop will be an induction loop amplifier designed for small spaces (like a cubicle). It will have:
- Driving capability for a ~10m loop length (at two turns), connected via binding posts.
- Inputs for telephone via a handset connector and two audio inputs via minijacks.
- Mute switch and a remote mute input (for a "get my attention" switch).
- Mains powered with an IEC C14 connector for the input.
Project Status
Initial design phase.
