Difference between revisions of "Arduibug"

From Hackstrich
(New project page.)
 
 
(11 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
The Arduibug is a small adapter board that 'wedges in' between the chip and the socket on the Arduino Diecimila or Duemilanove and allows use of a Debugwire in-circuit-debugger.  The normal Arduino board does not allow this due to other components on the /RST line.  The board is completely passive, the only components are sockets/headers/switches.
 
The Arduibug is a small adapter board that 'wedges in' between the chip and the socket on the Arduino Diecimila or Duemilanove and allows use of a Debugwire in-circuit-debugger.  The normal Arduino board does not allow this due to other components on the /RST line.  The board is completely passive, the only components are sockets/headers/switches.
  
[[Category:Current Projects]]
+
== Project Status ==
 +
* 2012-12: Newer Arduinos make this much easier (via a solder jumper).  Cancelling the project as it's not needed anymore!
 +
* PCB design complete, initial physical validation looks good.  BOM on file at Digikey, boards ordered and received from @laen.  Parts ordered and received from Mouser.
 +
 
 +
[[Category:Cancelled Projects]]

Latest revision as of 04:56, 26 December 2012

The Arduibug is a small adapter board that 'wedges in' between the chip and the socket on the Arduino Diecimila or Duemilanove and allows use of a Debugwire in-circuit-debugger. The normal Arduino board does not allow this due to other components on the /RST line. The board is completely passive, the only components are sockets/headers/switches.

Project Status

  • 2012-12: Newer Arduinos make this much easier (via a solder jumper). Cancelling the project as it's not needed anymore!
  • PCB design complete, initial physical validation looks good. BOM on file at Digikey, boards ordered and received from @laen. Parts ordered and received from Mouser.