Anchor

Anchor will be an electronic current/voltage sink, for testing/characterizing power supplies and other similar tasks.

• Desired features/specs:
  • Constant current and constant voltage options
    • Maybe constant power too?
  • Ramp-up/down automatically and track outputs
  • Pulse load to test transient response
  • 5A/100V maximums
    • 500W dissipation in a FET is a bit nuts, so it won't be 5A *at* 100V
    • 100W continuous, 500W pulse might be reasonable? Would be nice anyway.
  • Some kind of computer interface for more complicated tests/more detailed data analysis
    • USB would be easy to implement
    • Ethernet could be cool, but that seems overkill here
    • GPIB would be the traditional choice for test gear, but I've never done any work with it
• PIC24FJ256DA210 will be used as it has all the graphics/LCD drive/acceleration built in to enable a nice colour TFT display
  • Inputs
    • Digital
      • Load On/Off
      • CC/CV mode?
      • 2 for UI quadrature encoder
    • MCU-integrated 10-bit ADC
      • Heatsink temperature
      • UI pot (if used)
    • I²C
      • LTC2453 I2C 16-bit ADC for current and voltage measurement
  • Outputs
    • Digital
      • 1 for a CC/CV mode relay (if required)
    • Analog/PWM
      • Output drive (to op-amp)
• An LCD would be cool to plot the response of load variations without a PC (transient response, current limits, etc.)
  • Could use a simple STN monochrome panel, would be cheap and work well
  • Could alternatively use a touchscreen OLED, would be expensive but look really cool
  • Middle ground would be a touchscreen LCD, which would be not-crazy-expensive and still look pretty cool
  • With any of these options, want the critical UI bits to be physical controls (current/voltage mode/setting)