Solder Paste Dispenser

From Hackstrich
Revision as of 10:53, 19 October 2010 by SarahEmm (talk | contribs) (Status-categorizing.)

The Solder Paste Dispenser project's aim is to assemble a device that can be used to easily apply solder paste to boards using minimal manual effort.

Project Status

Parts for main system ordered (though dispenser controller is as-is possibly-broken). Awaiting arrival.

Goals/Requirements

  • Operate independently of a shop air source
  • Dispense using a foot pedal or finger switch
  • Have minimal parts so it can be stored in a small bin at the lab

System Plan

  • Small (1/4 gallon) air tank, can charge using a schraeder valve from a tire pump
  • EFD 2000XL dispenser controller
Retrieved from "http://hackstrich.sarahemm.net/wiki/index.php?title=Solder_Paste_Dispenser&oldid=324"