Solder Paste Dispenser

From Hackstrich
Revision as of 23:13, 18 October 2010 by SarahEmm (talk | contribs) (Initial page for the solder paste dispenser project.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The Solder Paste Dispenser project's aim is to assemble a device that can be used to easily apply solder paste to boards using minimal manual effort.

Goals/Requirements

  • Operate independently of a shop air source
  • Dispense using a foot pedal or finger switch
  • Have minimal parts so it can be stored in a small bin at the lab

System Plan

  • Small (1/4 gallon) air tank, can charge using a schraeder valve from a tire pump
  • EFD 2000XL dispenser controller
Retrieved from "http://hackstrich.sarahemm.net/wiki/index.php?title=Solder_Paste_Dispenser&oldid=316"