CubeLoop

The CubeLoop will be an induction loop amplifier designed for small spaces (like a cubicle). It will have:

• Driving capability for a ~10m loop length (at two turns), connected via binding posts.
• Inputs for telephone via a handset connector and two audio inputs via minijacks.
• Mute switch and a remote mute input (for a "get my attention" switch).
• Mains powered with an IEC C14 connector for the input.

Project Status

Initial design phase.

Front Panel

• Power switch
• Power LED (if not integrated into power switch)
• Mute switch
• Input selector
• Volume knob

Rear Panel

• IEC C14 input for mains power
• Two binding posts for loop connection
• Telephone handset connector input
• Two mini-jack inputs for audio