Arduibug

From Hackstrich
Revision as of 04:56, 26 December 2012 by SarahEmm (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The Arduibug is a small adapter board that 'wedges in' between the chip and the socket on the Arduino Diecimila or Duemilanove and allows use of a Debugwire in-circuit-debugger. The normal Arduino board does not allow this due to other components on the /RST line. The board is completely passive, the only components are sockets/headers/switches.

Project Status

  • 2012-12: Newer Arduinos make this much easier (via a solder jumper). Cancelling the project as it's not needed anymore!
  • PCB design complete, initial physical validation looks good. BOM on file at Digikey, boards ordered and received from @laen. Parts ordered and received from Mouser.
Retrieved from "http://hackstrich.sarahemm.net/wiki/index.php?title=Arduibug&oldid=1674"