Difference between revisions of "MultiSerial Shield"
From Hackstrich
(Updated page to reflect Rev. 1 design.) |
m (Arduino MultiSerial Shield moved to MultiSerial Shield: Shouldn't be calling things Arduino...) |
(No difference)
| |
Revision as of 01:29, 11 December 2009
The Arduino MultiSerial shield will let the Arduino access two RS232 serial ports via I2C. It will have switchable 3.3v or RS232 levels. This project exists mainly as a debugging tool for networks of BlinkieBits, as (at least during BlinkieNet design/prototyping) it would be extremely useful to be able to receive debugging information from a whole network of BlinkieBits, rather than just one at a time.
- The NXP SC16IS752 chip is used, which gives 2 channels for ~$7. It needs 3.3v I/O and talks 3.3v RS232, so level shifters are needed. The I2C level shifter is a PCA9306 ($0.95 qty. 1), and the RS232 level shifter is a second-sourced TI MAX3232 in a SOT16 package ($1.70 qty. 1).
