Difference between revisions of "Anchor"
From Hackstrich
(LCD pondering/research.) |
(Finalized display, added a touchscreen controller) |
||
| Line 19: | Line 19: | ||
**** CC/CV mode? | **** CC/CV mode? | ||
**** 2 for UI quadrature encoder | **** 2 for UI quadrature encoder | ||
| + | **** 2 for touchscreen | ||
*** MCU-integrated 10-bit ADC | *** MCU-integrated 10-bit ADC | ||
**** Heatsink temperature | **** Heatsink temperature | ||
**** UI pot (if used) | **** UI pot (if used) | ||
| + | **** 2 for touchscreen | ||
*** I<sup>2</sup>C | *** I<sup>2</sup>C | ||
**** LTC2453 I2C 16-bit ADC for current and voltage measurement | **** LTC2453 I2C 16-bit ADC for current and voltage measurement | ||
| + | **** AR1020 I2C resistive touchscreen controller (will try to eliminate it and do it in the PIC for revision 2) | ||
** '''Outputs''' | ** '''Outputs''' | ||
*** Digital | *** Digital | ||
| Line 32: | Line 35: | ||
** WQVGA is a nice size, can get a menu/buttons on the side and still have room for the info display | ** WQVGA is a nice size, can get a menu/buttons on the side and still have room for the info display | ||
** Likely still want the critical UI bits to be physical controls (current/voltage mode/setting) | ** Likely still want the critical UI bits to be physical controls (current/voltage mode/setting) | ||
| − | + | ** The [http://ca.mouser.com/ProductDetail/Newhaven-Display/NHD-43-480272MF-ATXI-T-1/?qs=sGAEpiMZZMvkC18yXH9iIh1DSVlmwX%2f6zmg5hbQkdt0%3d Newhaven NHD-43-480272MF-ATXI-T-1] from Mouser seems the best option for size/touch/resolution | |
| − | ** The [http://ca.mouser.com/ProductDetail/Newhaven-Display/NHD-43-480272MF-ATXI-T-1/?qs=sGAEpiMZZMvkC18yXH9iIh1DSVlmwX%2f6zmg5hbQkdt0%3d Newhaven NHD-43-480272MF-ATXI-T-1] from Mouser | ||
| − | |||
| − | |||
[[Category:Current Projects]] | [[Category:Current Projects]] | ||
[[Category:Status/Waiting for Time]] | [[Category:Status/Waiting for Time]] | ||
Revision as of 17:51, 25 December 2010
Anchor will be an electronic current/voltage sink, for testing/characterizing power supplies and other similar tasks.
- Desired features/specs:
- Constant current and constant voltage options
- Maybe constant power too?
- Ramp-up/down automatically and track outputs
- Pulse load to test transient response
- 5A/100V maximums
- 500W dissipation in a FET is a bit nuts, so it won't be 5A *at* 100V
- 100W continuous, 500W pulse might be reasonable? Would be nice anyway.
- Some kind of computer interface for more complicated tests/more detailed data analysis
- USB would be easy to implement
- Ethernet could be cool, but that seems overkill here
- GPIB would be the traditional choice for test gear, but I've never done any work with it
- Constant current and constant voltage options
- PIC24FJ256DA210 will be used as it has all the graphics/LCD drive/acceleration built in to enable a nice colour TFT display
- Inputs
- Digital
- Load On/Off
- CC/CV mode?
- 2 for UI quadrature encoder
- 2 for touchscreen
- MCU-integrated 10-bit ADC
- Heatsink temperature
- UI pot (if used)
- 2 for touchscreen
- I2C
- LTC2453 I2C 16-bit ADC for current and voltage measurement
- AR1020 I2C resistive touchscreen controller (will try to eliminate it and do it in the PIC for revision 2)
- Digital
- Outputs
- Digital
- 1 for a CC/CV mode relay (if required)
- Analog/PWM
- Output drive (to op-amp)
- Digital
- Inputs
- Want a graphical LCD for the output/UI, and the PIC chosen will drive a nice TFT
- WQVGA is a nice size, can get a menu/buttons on the side and still have room for the info display
- Likely still want the critical UI bits to be physical controls (current/voltage mode/setting)
- The Newhaven NHD-43-480272MF-ATXI-T-1 from Mouser seems the best option for size/touch/resolution
