Difference between revisions of "Arduibug"
From Hackstrich
(parts ordered from Mouser.) |
(Parts received.) |
||
| Line 2: | Line 2: | ||
== Project Status == | == Project Status == | ||
| − | PCB design complete, initial physical validation looks good. BOM on file at Digikey, boards ordered and received from @laen. Parts ordered from Mouser. | + | PCB design complete, initial physical validation looks good. BOM on file at Digikey, boards ordered and received from @laen. Parts ordered and received from Mouser. |
[[Category:Current Projects]] | [[Category:Current Projects]] | ||
| − | [[Category:Status/Waiting for | + | [[Category:Status/Waiting for Time]] |
Revision as of 04:26, 21 November 2010
The Arduibug is a small adapter board that 'wedges in' between the chip and the socket on the Arduino Diecimila or Duemilanove and allows use of a Debugwire in-circuit-debugger. The normal Arduino board does not allow this due to other components on the /RST line. The board is completely passive, the only components are sockets/headers/switches.
Project Status
PCB design complete, initial physical validation looks good. BOM on file at Digikey, boards ordered and received from @laen. Parts ordered and received from Mouser.
