Difference between revisions of "Solder Paste Dispenser"
From Hackstrich
(Initial page for the solder paste dispenser project.) |
(Project status update.) |
||
| Line 1: | Line 1: | ||
The Solder Paste Dispenser project's aim is to assemble a device that can be used to easily apply solder paste to boards using minimal manual effort. | The Solder Paste Dispenser project's aim is to assemble a device that can be used to easily apply solder paste to boards using minimal manual effort. | ||
| + | |||
| + | == Project Status == | ||
| + | Parts for main system ordered (though dispenser controller is as-is possibly-broken). Awaiting arrival. | ||
== Goals/Requirements == | == Goals/Requirements == | ||
Revision as of 00:24, 19 October 2010
The Solder Paste Dispenser project's aim is to assemble a device that can be used to easily apply solder paste to boards using minimal manual effort.
Project Status
Parts for main system ordered (though dispenser controller is as-is possibly-broken). Awaiting arrival.
Goals/Requirements
- Operate independently of a shop air source
- Dispense using a foot pedal or finger switch
- Have minimal parts so it can be stored in a small bin at the lab
System Plan
- Small (1/4 gallon) air tank, can charge using a schraeder valve from a tire pump
- EFD 2000XL dispenser controller
