Difference between revisions of "Skating Lap Counter"
From Hackstrich
(Setting dormant for now.) |
|||
| (8 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
= Project Status = | = Project Status = | ||
| + | * 2015-09-12: Putting this on the back burner since I don't have time for it and have been off-skates injured for 6 months now anyways. | ||
| + | * 2014-08-05: Boards are here! Likely won't get to this until after burn though. | ||
| + | * 2014-07-07: Checklisted and sent to OSH Park. | ||
| + | * 2014-07-06: Finished all routing for the RX board. Need to do silk and run the checklist still, then can send both RX and TX to OSH Park. | ||
| + | * 2014-07-05: Redid DC/DC to a buck/boost design, added silkscreen LCD template. Started component placement. | ||
| + | * 2014-07-04: Added buzzer and associated circuitry. | ||
| + | * 2014-07-03: Almost finished the RX schematic, but realized I forgot the audio signaller and that the DC-DC chosen is buck-only and needs to be buck/boost. | ||
| + | * 2014-07-01: More work on the RX, getting close to done the schematic side. | ||
| + | * 2014-06-30: Worked on the design/BOM/schematic for the RX more. | ||
| + | * 2014-06-29: Completed routing TX PCB and checklisted it. Started designing the RX. | ||
* 2014-06-28: Started putting idea together, designed transmitter BOM/schematic, started working on PCB layout. 5 airwires left. | * 2014-06-28: Started putting idea together, designed transmitter BOM/schematic, started working on PCB layout. 5 airwires left. | ||
| Line 8: | Line 18: | ||
** IR emitter, microcontroller, and battery | ** IR emitter, microcontroller, and battery | ||
** When switched on, transmits a code repeatedly | ** When switched on, transmits a code repeatedly | ||
| − | ** | + | ** Rechargeable via USB |
* Base unit with an IR receiver and display | * Base unit with an IR receiver and display | ||
** Shows how many times each skate module has passed by | ** Shows how many times each skate module has passed by | ||
| + | ** USB rechargeable and USB data interface for possible future use | ||
| − | [[Category: | + | [[Category:Dormant Projects]] |
Latest revision as of 18:28, 12 September 2015
Skating Lap Counter is a project to automate counting laps skated on a derby track.
Project Status
- 2015-09-12: Putting this on the back burner since I don't have time for it and have been off-skates injured for 6 months now anyways.
- 2014-08-05: Boards are here! Likely won't get to this until after burn though.
- 2014-07-07: Checklisted and sent to OSH Park.
- 2014-07-06: Finished all routing for the RX board. Need to do silk and run the checklist still, then can send both RX and TX to OSH Park.
- 2014-07-05: Redid DC/DC to a buck/boost design, added silkscreen LCD template. Started component placement.
- 2014-07-04: Added buzzer and associated circuitry.
- 2014-07-03: Almost finished the RX schematic, but realized I forgot the audio signaller and that the DC-DC chosen is buck-only and needs to be buck/boost.
- 2014-07-01: More work on the RX, getting close to done the schematic side.
- 2014-06-30: Worked on the design/BOM/schematic for the RX more.
- 2014-06-29: Completed routing TX PCB and checklisted it. Started designing the RX.
- 2014-06-28: Started putting idea together, designed transmitter BOM/schematic, started working on PCB layout. 5 airwires left.
Architecture
- Small module that attaches to one skate
- IR emitter, microcontroller, and battery
- When switched on, transmits a code repeatedly
- Rechargeable via USB
- Base unit with an IR receiver and display
- Shows how many times each skate module has passed by
- USB rechargeable and USB data interface for possible future use
