Difference between revisions of "CPLD Intro Board"
From Hackstrich
(Created page with "I can't find a good Lattice-based intro board for CPLD stuff that has good I/O, a programmer, and is cheap, so I'm designing one instead. == Project Status == * 2014-12-29: Star...") |
|||
| Line 10: | Line 10: | ||
* 8x LEDs | * 8x LEDs | ||
* 1x 7-segment LED display | * 1x 7-segment LED display | ||
| − | |||
* USB JTAG via FT2232 (channel A) | * USB JTAG via FT2232 (channel A) | ||
** USB serial via same FT2232 (channel B) | ** USB serial via same FT2232 (channel B) | ||
Revision as of 18:37, 29 December 2014
I can't find a good Lattice-based intro board for CPLD stuff that has good I/O, a programmer, and is cheap, so I'm designing one instead.
Project Status
- 2014-12-29: Started putting idea together.
Specs
- MachXO CPLD LCMXO256C-3TN100C
- 8x slide switches
- 8x pushbuttons
- 8x LEDs
- 1x 7-segment LED display
- USB JTAG via FT2232 (channel A)
- USB serial via same FT2232 (channel B)
- All pins also on expansion connectors
- Onboard peripherals disablable via solder jumpers or something?
- Possibly also Arduino shield connector footprints to use it as a shield?
- Would be 3.3v-only though, so of limited use
