Difference between revisions of "MeterBoard/16A"
From Hackstrich
| Line 2: | Line 2: | ||
== Status == | == Status == | ||
| + | * 2014-12-16: 3 boards and 1 set of parts are here. | ||
* 2014-11-10: Checklisted/finished board, CAMed, sent off to OSH Park for manufacturing. | * 2014-11-10: Checklisted/finished board, CAMed, sent off to OSH Park for manufacturing. | ||
* 2014-11-09: Completed BOM and schematic, and completed board layout except for the checklist. Will checklist/CAM it tomorrow. | * 2014-11-09: Completed BOM and schematic, and completed board layout except for the checklist. Will checklist/CAM it tomorrow. | ||
Revision as of 12:20, 16 December 2014
MeterBoard/16A is a module for the MeterBoard system that drives 16 analog meters.
Status
- 2014-12-16: 3 boards and 1 set of parts are here.
- 2014-11-10: Checklisted/finished board, CAMed, sent off to OSH Park for manufacturing.
- 2014-11-09: Completed BOM and schematic, and completed board layout except for the checklist. Will checklist/CAM it tomorrow.
- 2014-11-08: Started putting together initial design.
Specs
- SPI interface to MeterBoard system.
- 16 buffered analog outputs that can source 50mA at 2.5v each (configurable per-channel levels via resistors)
- 8-bit outputs resolution, so at 50mV full-scale each step is 190uV
- ~1/3 degree steps on a 90 degree regular meter
- ~1 degree steps on a 240 degree long-scale meter
- 8-bit outputs resolution, so at 50mV full-scale each step is 190uV
