Difference between revisions of "CubeLoop"
From Hackstrich
(Remote mute input would be really handy. Also should use binding posts for the loop, not the push-in speaker connectors.) |
(Work funded a loop amplifier for me and it has almost all this functionality :)) |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 8: | Line 8: | ||
Initial design phase. | Initial design phase. | ||
| − | [[Category: | + | == Front Panel == |
| + | * Power switch | ||
| + | * Power LED (if not integrated into power switch) | ||
| + | * Mute switch | ||
| + | * Input selector | ||
| + | * Gain knob | ||
| + | |||
| + | == Rear Panel == | ||
| + | * IEC C14 input for mains power | ||
| + | * Two binding posts for loop connection | ||
| + | * Telephone handset connector input | ||
| + | * Two mini-jack inputs for audio | ||
| + | * Remote mute input (another mini-jack? or maybe a 1/4" TS jack so a pedal could be used?) | ||
| + | |||
| + | == Resources == | ||
| + | [http://www.marcspages.co.uk/tech/deafspec.htm DIY loop amplifier info] | ||
| + | |||
| + | [[Category:Cancelled Projects]] | ||
Latest revision as of 02:28, 29 June 2013
The CubeLoop will be an induction loop amplifier designed for small spaces (like a cubicle). It will have:
- Driving capability for a ~10m loop length (at two turns), connected via binding posts.
- Inputs for telephone via a handset connector and two audio inputs via minijacks.
- Mute switch and a remote mute input (for a "get my attention" switch).
- Mains powered with an IEC C14 connector for the input.
Project Status
Initial design phase.
Front Panel
- Power switch
- Power LED (if not integrated into power switch)
- Mute switch
- Input selector
- Gain knob
Rear Panel
- IEC C14 input for mains power
- Two binding posts for loop connection
- Telephone handset connector input
- Two mini-jack inputs for audio
- Remote mute input (another mini-jack? or maybe a 1/4" TS jack so a pedal could be used?)
