Difference between revisions of "MultiSerial Shield"
From Hackstrich
(Adding schematic.) |
(Updating page with Arduino Shield template.) |
||
| Line 1: | Line 1: | ||
| + | {{Infobox Arduino Shield | ||
| + | |productpage=[http://hackstrich.sarahemm.net/MultiSerial_Shield This Page] | ||
| + | |img=[[Image:MultiSerial_Shield.png|200px]] | ||
| + | |name=MultiSerial Shield | ||
| + | |function=Provide two RS232 ports with 3.3v or RS232 levels, accessible via I2C. | ||
| + | |chips=NXP SC16IS752 | ||
| + | |ports=2x RS232 (3.3v or RS232 levels), 10x GPIO | ||
| + | |pins=A4 (I2C SDA), A5 (I2C SCL) | ||
| + | }} | ||
| + | |||
The Arduino MultiSerial shield will let the Arduino access two RS232 serial ports via I2C. It will have switchable 3.3v or RS232 levels. This project exists mainly as a debugging tool for networks of [[BlinkieBits]], as (at least during BlinkieNet design/prototyping) it would be extremely useful to be able to receive debugging information from a whole network of BlinkieBits, rather than just one at a time. | The Arduino MultiSerial shield will let the Arduino access two RS232 serial ports via I2C. It will have switchable 3.3v or RS232 levels. This project exists mainly as a debugging tool for networks of [[BlinkieBits]], as (at least during BlinkieNet design/prototyping) it would be extremely useful to be able to receive debugging information from a whole network of BlinkieBits, rather than just one at a time. | ||
| Line 6: | Line 16: | ||
[[Category:Current Projects]] | [[Category:Current Projects]] | ||
| + | [[Category:Arduino Shields]] | ||
Revision as of 15:22, 12 December 2009
| |
| This Page | |
| Function: | Provide two RS232 ports with 3.3v or RS232 levels, accessible via I2C. |
|---|---|
| Key Chips: | NXP SC16IS752 |
| External Ports: | 2x RS232 (3.3v or RS232 levels), 10x GPIO |
| Required Pins: | A4 (I2C SDA), A5 (I2C SCL) |
| Optional Pins: | None |
The Arduino MultiSerial shield will let the Arduino access two RS232 serial ports via I2C. It will have switchable 3.3v or RS232 levels. This project exists mainly as a debugging tool for networks of BlinkieBits, as (at least during BlinkieNet design/prototyping) it would be extremely useful to be able to receive debugging information from a whole network of BlinkieBits, rather than just one at a time.
- The NXP SC16IS752 chip is used, which gives 2 channels for ~$7. It needs 3.3v I/O and talks 3.3v RS232, so level shifters are needed. The I2C level shifter is a PCA9306 ($0.95 qty. 1), and the RS232 level shifter is a second-sourced TI MAX3232 in a SOT16 package ($1.70 qty. 1).
